Shopping Cart

Ligandrol (LGD 4033) Dosage and Cycle Guide

What is Ligandrol (LGD 4033)?

Ligandrol, also known as LGD-4033, is a Selective Androgen Receptor Modulator (SARM) known for its anabolic effects, making it a great alternative to anabolic steroids.

LGD-4033 works by selectively binding to androgen receptors in muscle tissues, stimulating the growth of lean muscle mass and increasing muscle strength. Unlike anabolic steroids, LGD-4033 has minimal androgenic effects, meaning it doesn’t cause the unwanted side effects of steroid use.

Clinical trials have shown that LGD-4033 can help:

  • increase muscle size and strength
  • improve muscle recovery
  • prevent muscle wasting

It has also been found to positively affect bone density and composition, making it beneficial for those looking to improve their overall body composition.

It is important to note that LGD-4033 should be used responsibly and in accordance with recommended dosages and cycle lengths, so we’ll be looking at those next.

LGD 4033 Dosage

When dosing LGD-4033, following the recommended guidelines for optimal results and avoiding potential mistakes is important. Most people will typically dose in a range of 10mg to 20mg a day. This is usually taken as one dose, but some people prefer to split it and take it every twelve hours, which has been reported to have greater efficiency.

It is crucial to dose LGD-4033 correctly. Incorrect dosing or ignoring post-cycle therapy (PCT), usually necessary for most SARMs, can increase the likelihood of long-term side effects. Although significant permanent damage is unlikely with one cycle of SARMs, it is always best to err on the side of caution and avoid unnecessary risks.

For women, it is generally recommended to halve the dosages mentioned above. The biological differences between genders mean that even a smaller male can tolerate almost twice as many SARMs as a female without potential hormone problems. Prioritising safety and ensuring correct dosing is crucial to avoiding adverse effects.

LGD 4033 Cycle & Stacks

The typical cycle length for LGD-4033 can vary among users, typically ranging from 6 to 12 weeks. The cycle duration depends on experience level, fitness goals, and individual response to the compound. Longer cycles may be suitable for experienced users looking for maximum muscle gains, while shorter cycles may be preferred by beginners or those concerned about potential side effects.

It is important to consider bulking and cutting phases when structuring an LGD-4033 cycle for specific fitness goals. Individuals aim to gain lean muscle mass and increase strength during bulking. In this case, LGD-4033 can be stacked with compounds like MK-677, a growth hormone secretagogue, to enhance muscle growth further. A typical bulking cycle may last for 8 to 12 weeks.

On the other hand, during a cutting cycle, the goal is to reduce body fat while preserving muscle mass. LGD-4033 can be used with other compounds, such as Cardarine (GW-501516), which promotes fat loss and endurance. A typical cutting cycle may last for 6 to 8 weeks.

Following proper post-cycle therapy (PCT) after completing an LGD-4033 cycle is crucial, regardless of the fitness goal. This helps restore natural testosterone levels and minimise any potential side effects. PCT protocols may include compounds such as Clomid or Nolvadex.

What To Stack With LGD 4033?

When maximising the effects of LGD-4033, many people stack it with other compounds to further enhance their fitness goals. Stacking refers to combining multiple supplements or compounds to achieve synergistic effects. 

There are several reasons why people consider stacking with LGD-4033:

  1. Enhanced Muscle Growth: Stacking LGD-4033 with other compounds can increase muscle gains. Certain compounds, such as MK-677 or RAD-140, are known for their potent anabolic effects and can further promote muscle growth when stacked with LGD-4033.
  2. Increased Strength and Performance: Stacking LGD-4033 with compounds like YK-11 or Ostarine can help improve strength and physical performance. These compounds have been shown to enhance muscle strength and allow users to lift heavier weights, leading to more significant gains.
  3. Fat Loss and Body Recomposition: LGD-4033 is popular for its ability to build lean muscle mass and its potential to aid in fat loss. By stacking LGD-4033 with compounds such as Cardarine or SR9009, individuals can experience improved fat loss and body recomposition.

Choosing the right stack depends on individual goals and preferences. Some popular compounds to stack with LGD-4033 include MK-677, RAD-140, YK-11, Ostarine, Cardarine, and SR9009. These compounds have been widely used and researched, showing positive effects on muscle growth, fat loss, and strength gains.

How to Take LGD-4033

Taking LGD-4033 as a liquid offers greater versatility than pre-filled capsules and tablets. It is most commonly taken orally, which can be measured with a syringe and swallowed. 

For those seeking further increased absorption rates and effects, it can be taken sublingually – whereby the liquid is placed beneath the tongue for 10-15 seconds before swallowing. This method allows direct contact with the mucus membrane that lines the mouth, providing a more direct route of entry into the bloodstream. 

Taking LGD-4033 as a liquid offers advantages due to its accurate dosing capabilities, allowing a dosage of approximately 4-12 milligrams per day to be easily achieved. Tests suggest that taking this drug on an empty or full stomach does not affect its biological availability either way – so users may take it at their preferred time without any concerns of reduced effectiveness. 

Due to its potent expression in muscle specifically, LGD-4033 has fewer side effects than other oral SARMs like Ostarine and Cardarine. Even though each person should research thoroughly before using – via reputable sources like academic journals or doctors – this drug seems safe and effective.

Does LGD-4033 Need PCT?

Like other SARMs, LGD-4033 can potentially suppress natural testosterone levels while being used, so PCT is always necessary after a cycle.

Post Cycle Therapy (PCT) restores hormonal balance and ensures the body can resume normal hormone production after using anabolic substances. PCT is commonly used with traditional anabolic steroids to prevent hormone imbalances, but its role with SARMs is less established.

It is essential to prioritise the health and well-being of your body when using any performance-enhancing substances. Monitoring hormone levels and seeking professional guidance can help determine whether PCT is necessary after an LGD-4033 cycle and ensure a safe recovery process.

What to Expect When Taking LGD 4033

man weight lifting in the gym

When taking LGD 4033, it is crucial to understand the importance of proper usage and dosing. This SARM can provide significant benefits, such as lean muscle mass gains and increased muscle strength, but it must be used responsibly.

Cycling LGD-4033 is essential to minimise the risk of adverse effects and maintain the body’s natural hormone production. An ideal cycle length for LGD-4033 is typically around 8-12 weeks. This duration allows for substantial muscle gains while minimising the potential for negative side effects.

In terms of dosing, the recommended daily dosage of LGD 4033 is typically between 5-10mg for most users. However, it is important to note that individual tolerance and response may vary. Therefore, start with a lower dosage and gradually increase it as necessary. Consulting with a healthcare professional or a knowledgeable expert is highly recommended to ensure optimal dosing based on your specific needs and goals.

Taking LGD-4033 at the same time every day is also important for maintaining a consistent blood level of the compound. Many users find it beneficial to take LGD-4033 in the morning or before a workout, as it can enhance physical performance and boost energy during training sessions.

Is LGD 4033 Safe?

When used as directed, LGD-4033 has been shown to be one of the safest SARMs to take. It selectively targets androgen receptors in muscle tissues, resulting in anabolic effects without the androgenic side effects commonly associated with anabolic steroids.

However, it is crucial to consider the potential risks and side effects. LGD-4033, like any other compound that influences hormone levels, can suppress natural testosterone production. This can decrease energy levels, libido, and muscle gains during and after the cycle. Proper post-cycle therapy (PCT) is essential to restore hormone levels and mitigate potential negative effects.

Other side effects can include:

  • Headaches
  • Joint pain
  • Testicle pain
  • Mild hair loss
  • Dry mouth
  • Water retention

To ensure safety, follow the usage guidelines; start with a lower dose to assess tolerance and consider consulting with a healthcare professional or knowledgeable expert. Additionally, obtaining products from reputable sources is crucial to ensure quality and minimise the risk of consuming counterfeit or contaminated substances.

Where can I buy Ligandrol LGD-4033 in the UK?

Ligandrol LGD-4033 is a popular selective androgen receptor modulator (SARM), and when taken correctly, it is known for its potential to promote lean muscle mass development and improve physical performance. 

When dosing, users should start with a lower dose to assess tolerance and gradually increase it if necessary for optimal results. It is also important to consider consulting with a healthcare professional or knowledgeable expert before starting an LGD-4033 cycle.

When buying LGD-4033, sourcing the product from reputable suppliers is essential. One reliable option is UK SARMs, a trusted supplier that offers a wide range of SARMs, including LGD 4033. Our products are known and relied upon for their quality and authenticity.

By buying LGD-4033 from a reputable source like UK SARMs, you can ensure that you are getting legitimate and high-quality LGD-4033 for your fitness goals. For a review and results of taking LGD 4033, check out our blog.